Service Hotline
86-574-28512158
QQ:
FOLLOW US
© 2018 Ningo Hallem Electronic Technology Co., Ltd. 浙ICP备18043022号 Powered by www.300.cn
Products
Flexible PCB 3D Print System AJP250B
排序编号
a1
Page view:
描述
Flexible printed circuit board is a highly reliable and excellent flexible printed circuit board based on polyimide or polyester film. Soft plate or FPC is characterized by high wiring density, light weight and thin thickness.
Product Parameter | ||
Minimum line width | 10μm(material and surface dependent) | |
Single Pass Layer Tickness | 0.1-2.0μm | |
Print Spees | 20mm/s | |
Ink Viscosity Range | Ultrasonic Atomizer | 1-20cp |
Pneumatic Atomizer | 1-1000cp | |
Pneumatic Atomizer | Heater | 25-60℃ |
Stirrer | Stirrer revolution per minute,viscosity dependent | |
Platen | Size | 300mmX300mm |
Heater | ≤100℃ | |
Laser | 750mW 830nm Multimodel Laser System | |
Date type | DXF | |
Droplet size | Ultrasonic | ≤50nm |
Pneumatic | ≤5μm | |
Print height | ≤10mm | |
Motion accuracy | ±6μm(x、y、z) | |
Motion repeatability | ±1μm(x、y、z) | |
Stand alone system dimensions | 1400mmx900mmx1750mm | |
Electrical | 220v 50HZ | |
Gas system | 28LPM Nitrogen Gas Input |
Samples Show

Selective Laser Melting 3D Print System SLM120
——
Other product
DLP technology is one of the light-curing forming technologies. It was first developed by Texas Instrument. It is called digital light processing rapid prototyping technology. DLP technology uses a hi
Laser with specific wavelength and intensity is focused on the surface of the photocurable material, which solidifies from point to line and from line to surface sequentially. The drawing of one layer
Sintering technology of powder compact by laser as heat source. This technology has unique advantages for sintered materials which are not easily completed by conventional sintering furnaces. Due to t